Metal Rolling Cutting Service

Our company offers metal cutting services to its clients. In this way, we ensure that our customers receive ready-made blanks of the required dimensions (rather than standard rolled metal) for further use as intended, for example:

 - Civil and industrial construction (reinforcement of monolithic reinforced concrete structures, construction of supports and load-bearing structures of buildings and facilities, finishing and roofing works, etc.).

 - Production of various fastener products (nails, bolts, fittings, studs, nuts, road signs, and much more).

 - Mechanical engineering and railcar manufacturing (production of parts and assemblies, housings, frames, and other structures of machines and mechanisms).

 - Installation and assembly of metal structures (fences, gates, railings, stairs).

 - Industry and manufacturing (installation and repair of technological equipment, pipelines, ventilation and water supply systems)

Types of Metal Products We Can Cut

With us, you can order cutting of all types of metal products presented in the catalog:

• sheet metal products (cold-formed sheet, cold-rolled sheet, steel strip);
• tubular products (profile pipes, electric-welded pipes, seamless pipes);
• long metal products (I-beams, round bars, square bars, reinforcing bars, wire rods).

For cutting metal products, we use gas and plasma cutting technologies, as well as band saws and guillotines.

Features and Advantages of Gas Cutting

A universal and widely used method of cutting metal products using a torch, cylinders with oxygen and propane. The gas heats the cutting line, after which the oxygen jet cuts the metal.

The advantages of this technology include:

• high cutting speed;
• autonomy and the ability to perform work in any location;
• the possibility of cutting almost any type of metal product.

The disadvantage of metal processing with a torch is the relatively low cutting accuracy, the need for further mechanical processing, and limitations on certain steel grades suitable for gas cutting.

Features and Advantages of Plasma Cutting

Plasma cutting of metal on CNC machines or using a specialized unit is the most precise type of processing. The result is a high-quality cut without buildup or deformation, requiring minimal cleaning. As a rule, it is used for cutting pipes and sheet metal up to 65 mm thick. The obtained blanks are used for parts of machines and mechanisms. The cut metal can be welded without preliminary processing.

Advantages of Cutting Metal on a Band Saw

Compared to other technologies, cutting metal with a rotating band saw (band saw machine) has many advantages, including:

1. Unlike gas cutting or welding, it is possible to work with a wide range of materials (structural steels, carbon and construction steel grades, stainless steel, and non-ferrous alloys based on aluminum, copper, etc.). As a rule, round bars and pipes are cut on a band saw.
2. Compared to expensive plasma and laser cutting, a band saw machine allows processing thick metal products in a cost-effective way.
3. High cutting accuracy and quality (width only 1.5 mm) minimizes metal waste.
4. The edges of the cut do not have burrs or scale, so no additional mechanical processing of the blank is required.
5. Metal products can be cut not only at a right angle but also at 60° and 45° (if фигурне cutting is required, plasma cutting is used).
6. Low cost and high speed of obtaining steel blanks due to the possibility of batch metal cutting.

Advantages and Features of Guillotine Metal Cutting

The technology of cutting metal on a guillotine has its own advantages:

1. It is possible to work with sheet metal and other types of metal products.
2. Conveyor cutting does not involve heating the metal, so the physical and mechanical properties of the blanks remain unchanged.
3. Minimal metal waste due to the absence of allowances for technological cutting.
4. The edges of the blanks are smooth, without deformation or buildup, so products after guillotine cutting do not require additional machining before drilling, painting, or welding.

What Determines the Cost of the Service

The price of the metal cutting service at the international company LEART is differentiated and depends on the following factors:

1. The volume of the batch of metal products that must be cut according to the specified dimensions.
2. The type of metal product and its profile (thickness, width).
3. The selected metal cutting technology.
4. The urgency of the order.
5. The need to deliver the blanks to the facility.

Order Metal Cutting Service at LEART

The metal cutting service is perfectly combined with the purchase of metal products. Now you no longer need to look for a contractor to cut the rolled metal purchased from a metal trader. It is enough to indicate in the metal purchase request the need for cutting (specify the type of metal product, the dimensions of the required blanks, and the cutting technology).

In turn, we guarantee high quality of work, an individual approach to each customer taking into account their loyalty to our company, and execution of the order in strict accordance with the provided technical task (drawings, project) within the agreed deadlines. You can also order delivery of metal products to any region of Europe.

You can find out your price for the metal cutting service from our consultant by calling one of the phone numbers listed on the website.